X601H FPV Quadcopter with HD Camera RC Drone with Altitude Hold, RTF, Extra Battery, Warning Buzzer and battery safe pouch for Beginner Black

December 12, 2017 - Comment

MJX X601H FPV Quadcopter with Altitude Hold Function, Six Motors Hexacopter The drone is designed as a beginner level drone. Less power, lower speed and altitude hold for an easier control. •Automatically Binding: – Turn on receiver 1st, next turn on drone and allow about 10secs and it should be connected. The incorrectly binding will

Buy Now! $59.99Amazon.com Price
(as of July 27, 2019 1:46 pm UTC - Details)

MJX X601H FPV Quadcopter with Altitude Hold Function, Six Motors Hexacopter
The drone is designed as a beginner level drone. Less power, lower speed and altitude hold for an easier control.

•Automatically Binding: – Turn on receiver 1st, next turn on drone and allow about 10secs and it should be connected.
The incorrectly binding will cause the drone to do 1 of the 2 things below:
1, It will only idle and never take off.
2, It does take off and will go flying off crazy.
Ensure your fingers are off the throttles when it’s binding.
•The motors and circuit board will heat up during use. Take a 10 minute cool down break between flights.

TIPS TO AVOID GETTING LOST OF CONTROL:
1, Ensure to use mode 2 to get more power when flying outdoor.
2, Press the red one key landing button to descend more quickly when the quad is in the sky.
3, Fly under light breeze to reduce the risk of being blown away.
4, Once you found the drone is too far away to control, please run closer to it

SPECIFICATION:
Flight time: About 8 minutes
Charging time: About 180 minutes
Batteries:
For Drone 1 X 7.4V 700mAh Rechargeable Li-Po battery
For Transmitter 4 X 1.5 AA batteries (NOT Included)
Remote Distance: 30 M
Age: 14+

FUNCTION:
Automatically binding
Altitude-hold mode
FPV Real time transmission
Headless mode
One key take off/ landing /return
Colorful Flashing Lights
2.4GHz 4 Channel 6 Axis Gyro
360°Eversion

PACKAGE:
1 x X601H Drone
1 x Transmitter
1 x FPV Camera
1 x Phone Holder
1 x Screwdriver
2 x 7.4V 700mAh Li-Po battery
1 x Lipo Battery Safe Bag
1 x LiPo Voltage Checker + Warning Buzzer
1 x USB charging cable
6 x Spare blades
1 x Manual

Comments

Write a comment

*